Nikon Z6III Accessories

Battery

The Z6III uses newer versions of the EN-EL15, currently the EN-EL15C. The EN-EL15C version has a higher capacity (2280mAh versus 1900mAh of previous versions). 

 You can use earlier versions of the EN-EL15 with the Z6III:

  • EN-EL15 — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
  • EN-EL15A — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
  • EN-EL15B — powers the camera, can be charged via USB in the camera, does support continuous USB power 
  • EN-EL15C — powers the camera, can be charged via USB in the camera, does support continuous USB power 

Other cameras that use this battery: Z5, Z5II, Z5IIC, Z6, Z6II, Z7, Z7II, Z8, Zf, and ZR.

A note about continuously powering the Z6III with a EN-EL15C battery and the camera hooked up to USB: Nikon is using the PD (Power Delivery) standard. That means that any USB C charger that meets the standard can power the camera; you don't need Nikon's own charger. However, you do need to be aware that there are USB-C cables out there that don't support this standard. Be very careful to make sure you're using a PD-complaint charger and a PD-compliant cable. Note that you wish to use USB charging the USB Power Delivery source needs to be 27 watts minimum (9 volts at 3 amps).

Quite a few dedicated chargers exist for the EN-EL15 batteries (and should charge all versions of the battery). I like the dual battery chargers that have level displays.

Cages, Plates

  • Fangtuo makes the M5V Pro kit for the Z6III
  • SmallRig 4519. A full cage for Nikon Z6III camera.
  • SmallRig 4522. "Night Eagle" A full cage for the Nikon Z6III camera with gunmetal brown color scheme.
  • SmallRig ????. A full cage for the Nikon Z6III camera mounted on MB-N14.

Viewfinder


Cards

  • Buy CFe (CFexpress) Type B cards of any speed for the first slot
  • Buy UHS-II capable SD cards of at least 300Mbps that are also marked U3 for video capability for the second slot
The following CFexpress Type B cards have Nikon’s blessing in the Z6III:
Approved CardsSeriesSizes
Nikon
660GB
NextorageNX-B2PRO165GB, 330GB, 660GB, 1330GB
NextorageNX-B3AE500GB, 1000GB, 2000GB
LexarProfessional GOLD512GB, 1TB, 2TB, 4TB
ProGrade DigitalGOLD256GB, 512GB, 1TB, 2TB
SanDiskExtreme Pro64GB, 128GB, 256GB, 512GB
SanDiskPRO-CINEMA320GB, 640GB
WiseCFX-B PRO640GB
ExascendESSENTIAL PRO512GB, 1TB

Remotes

The Z6III features Nikon's standard 10-pin rectangular remote connection, which is used for both wired and wireless remotes:<tk>

  • MC-DC2 wired remote — A simple wired remote. Lower cost versions of this solution exist, such as the Vello RS-N2II. Wireless versions are also available.
  • WR-R10 wireless transmitter (replaced by the WR-R11b) — Nikon's wireless remote system can trigger remote flashes, or be used with the WR-T10 to fire the camera remotely.
  • Foologrpahy Unleased N2 — A smartphone-controlled wireless trigger that plugs in the 10-pin connector on these cameras. Integrates with geotagging, and supports interval and long time shooting.

Other Nikon cameras using this connector: D90, D3100 and later, D5xxx, D7xxx, D6xx, D7xx, Df, Coolpix P7700, P7800, A, P1000, Z5, Z6, Z6II, Z7, and Z7II.

Nikon has made a wireless Bluetooth remote control for the camera:

  • ML-L7 wireless remote — A remote with additional programmable functions and controls. The Coolpix P1000 can also use this remote.
  • AODELAN ML-L7A Wireless shutter — a third-party clone of the Nikon ML-L7 remote.
  • JJC BTR-N1 Wireless Remote Control — another third-party clone of the Nikon ML-L7, though in a different style. JJC also makes a TP-N1 Shooting Grip (selfie stick) that comes with the wireless remote.
  • SmallRig Tripod Grip for ML-L7 — not actually a remote, but a place to put your remote in a small handgrip/tripod combination that works for selfie/video type work.

Other Nikon cameras using these Bluetooth remotes: Coolpix P950, Coolpix P1000, Coolpix A1000, Coolpix B600, Z30, Z50, Z50II, Zf, Z5, Z5II, Z5IIC, Z6II, and Z7II.

Remote grip:
  • MC-N10 Remote Grip — Allows remote control of the camera via USB-C.

Other

Underwater housings:
Vertical grips: 
  • MB-N14 was the grip designed for the Z6III
Looking for other photographic information? Check out our other Web sites:
photography: bythom.com | Nikon DSLRs: dslrbodies.com | Nikon film SLRs: filmbodies.com
Mission statement | Code of Ethics | Privacy Info | Sitemap

text and images © 2026 Thom Hogan — All Rights Reserved