Battery
The Z8 uses newer versions of the EN-EL15, currently the EN-EL15C. The EN-EL15C version has a higher capacity (2280mAh versus 1900mAh of previous versions).
You can use earlier versions of the EN-EL15 with the Z8:
- EN-EL15 — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
- EN-EL15A — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
- EN-EL15B — powers the camera, can be charged via USB in the camera, does support continuous USB power
- EN-EL15C — powers the camera, can be charged via USB in the camera, does support continuous USB power
Reminder: USB Power Delivery is only done on the bottom USB-C connector on the Z8.
Other cameras that use this battery: Z5, Z5II, Z5IIC, Z6, Z6II, Z6III, Z7, Z7II, Zf, and ZR.
A note about continuously powering the Z8 with a EN-EL15C battery and the camera hooked up to USB: Nikon is using the PD (Power Delivery) standard. That means that any USB C charger that meets the standard can power the camera; you don't need Nikon's own charger. However, you do need to be aware that there are USB-C cables out there that don't support this standard. Be very careful to make sure you're using a PD-complaint charger and a PD-compliant cable. Note that you wish to use USB charging the USB Power Delivery source needs to be 27 watts minimum (9 volts at 3 amps).
Quite a few dedicated chargers exist for the EN-EL15 batteries (and should charge all versions of the battery). I like the dual battery chargers that have level displays.
Cages, Plates
The following brackets, plates, and cages are available for the Nikon Z8:
- Kirk Photo BL-Z8 — L bracket for camera only
- Kirk Photo BL-Z8G — L bracket for camera with MB-N12
- ReallyRightStuff RRS-900017B — L bracket for camera only. US$200.
- SmallRig 3942 L-bracket — L portion can be positioned away from the doors. US$? (Not yet available in US).
- SmallRig 3940 Cage — lean camera cage, with handle option. US$70, US$50 for handle.
- SmallRig 3982 Cage — for Z8 with MB-N12. US$130.
Viewfinder
- Nikon's original eyepiece is DK-33
- Zemlin Photo makes a replacement eyepiece for the Z8 and Z9
- Hoodman has now released its Eyepiece for the Z8 and Z9
Cards
| Approved for RAW video | Series | Size |
|---|---|---|
| Nikon | 660GB | |
| Nextorage | NX-B1PRO | 165GB, 330GB, 660GB, 1330GB |
| ProGrade Digital | Cobalt 1700R | 325GB, 650GB |
| Wise | CFX-8 Pro | 640GB |
Remotes
The Z8 features Nikon's older 10-pin round remote connection, which is used for both wired and wireless remotes:
- MC-30A wired remote — Nikon's simple wired remote. Lower cost versions of this solution exist, such as the Vello RS-N1II. Wireless versions are also available. Also the Pixel Shutter remote.
- WR-R10 wireless transmitter (replaced by the WR-R11a)— Nikon's wireless remote system can trigger remote flashes, or be used with the WR-T10 to fire the camera remotely.
- Nikon's more sophisticated wired remote is the MC-36A Multi-Function remote. Costly, and doesn't really provide necessary functions for the Z9 that don't already exist in the camera itself (e.g. time-lapse ability).
Other Nikon cameras using this connector: D500, D8xx, D3 series, D4 series, D5, D6, Z9..
- MC-N10 Remote Grip — Allows remote control of the camera via USB-C.
Other
- MB-N12 is the grip that works for the Z8