Battery
The Z5IIC uses newer versions of the EN-EL15, currently the EN-EL15C. The EN-EL15C version has a higher capacity (2280mAh versus 1900mAh of previous versions).
You can use earlier versions of the EN-EL15 with the Z5IIC:
- EN-EL15 — may not work with the Z5IIC; if it does, it cannot be charged via USB in the camera and doesn't support continuous USB power
- EN-EL15A — powers the camera, cannot be charged via USB in the camera, doesn't support continuous USB power
- EN-EL15B — powers the camera, can be charged via USB in the camera, does support continuous USB power
- EN-EL15C — powers the camera, can be charged via USB in the camera, does support continuous USB power
Other cameras that use this battery: Z5, Z5II, Z6, Z6II, Z6III, Z7, Z7II, Z8, Zf, and ZR.
A note about continuously powering the Z5IIC with a EN-EL15C battery and the camera hooked up to USB: Nikon is using the PD (Power Delivery) standard. That means that any USB C charger that meets the standard can power the camera; you don't need Nikon's own charger. However, you do need to be aware that there are USB-C cables out there that don't support this standard. Be very careful to make sure you're using a PD-complaint charger and a PD-compliant cable. Note that you wish to use USB charging the USB Power Delivery source needs to be 27 watts minimum (9 volts at 3 amps).
Quite a few dedicated chargers exist for the EN-EL15 batteries (and should charge all versions of the battery). I like the dual battery chargers that have level displays.
Cages, Plates
As of the date shown at the bottom of this page, these are your options for plates and cages for the Z5IIC:
- Smallrig HawkLock — a quick release cage for the Z5IIC (6409)
- Smallrig Baseplate — a simple half inch deep (13mm) Arca-Swiss style plate, available in silver (6696) or black (6695)
- Smallrig L-Shaped Mount Plate — a full Arca-Style L-mount plage (6410)
Viewfinder
Z5IIC Viewfinder Eye Cup:
- The Nikon original is DK-29
- Kiwifotos DK-29 Long Soft replacement extends out further than Nikon's, and uses a soft silicone
- Hoodman HEYENZ HoodEye replacement is an oversize cup
- Amazon has a wide selection of replacements
- Zemlin Photo makes replacement eyecups with circular cups
Note that any Eye Cup you use needs to have the notch at the top for the eye detection mechanism to work. There are many older Eye Cups that will fit on the Nikon slip-on edges that do not feature that notch.
Cards
| Nikon Approved Cards | SDHC | SDXC |
|---|---|---|
| SanDisk Extreme PRO | 64GB, 128GB, 256GB, 512GB, 1TB | |
| SanDisk Extreme PLUS | 32GB | 64GB, 128GB, 256GB |
| SanDisk Ultra PLUS | 32GB | 64GB, 128GB, 256GB, 512GB |
| Lexar GOLD | 64GB, 128GB, 256GB | |
| Lexar SILVER | 64GB, 128GB, 256GB, 512GB | |
| Lexar SILVER PLUS | 64GB, 128GB, 256GB, 512GB | |
| Nextorage NX-F2 PRO | 64GB, 128GB, 256GB |
Remotes
- ML-L7 wireless remote — A remote with additional programmable functions and controls. The Coolpix P1000 can also use this remote.
- AODELAN ML-L7A Wireless shutter — a third-party clone of the Nikon ML-L7 remote.
- JJC BTR-N1 Wireless Remote Control — another third-party clone of the Nikon ML-L7, though in a different style. JJC also makes a TP-N1 Shooting Grip (selfie stick) that comes with the wireless remote.
- SmallRig Tripod Grip for ML-L7 — not actually a remote, but a place to put your remote in a small handgrip/tripod combination that works for selfie/video type work.
Other Nikon cameras using these Bluetooth remotes: Coolpix P950, Coolpix P1000, Coolpix A1000, Coolpix B600, Z30, Z50, Z50II, Zf, Z5, Z5II, Z6II, Z6III, and Z7II.
- MC-N10 Remote Grip — Allows remote control of the camera via USB-C.
Other
- Not supported